# Error When Running make flash On Arch Linux **URL:** \ **Category:** Help and Getting Started\ **Created:** [June 17, 2019, 3:19am UTC](https://community.keyboard.io/t/error-when-running-make-flash-on-arch-linux/2958 "2019-06-17T03:19:33Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![hjozwiak](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.keyboard.io/hjozwiak/32/2807_2.png) [@hjozwiak](https://community.keyboard.io/u/hjozwiak)\ **Post date:** [June 17, 2019, 3:19am UTC](https://community.keyboard.io/t/error-when-running-make-flash-on-arch-linux/2958/1 "2019-06-17T03:19:33Z")
Hello, When running make flash on my Arch machine, I get the following error and warning. BOARD\_HARDWARE\_PATH="/home/sektor/Arduino/hardware" /home/sektor/Arduino/hardware/keyboardio/avr/libraries/Kaleidoscope/bin//kaleidoscope-builder flash Building ./Model01-Firmware 0.0.0-g v1.22-63-gc41e into /tmp/kaleidoscope-sektor/sketch/538090969-Model01-Firmware.ino/output… - Size: firmware/Model01-Firmware/Model01-Firmware-0.0.0-g v1.22-63-gc41e.elf - Program: 25164 bytes (87.8% Full) - Data: 1340 bytes (52.3% Full) To update your keyboard’s firmware, hold down the ‘Prog’ key on your keyboard, and then press ‘Enter’. When the ‘Prog’ key glows red, you can release it. WARNING: your udev rules are currently configured to suggest that your keyboard is suitable for use by ModemManager. This means that there is a risk of ModemManager interfering. To avoid this, copy ``` /home/sektor/Arduino/hardware/keyboardio/avr/libraries/Kaleidoscope/bin/../etc/99-kaleidoscope.rules ``` to /etc/udev/rules.d WARNING: your udev rules are currently configured to suggest that your keyboard is suitable for use by ModemManager. This means that there is a risk of ModemManager interfering. To avoid this, copy ``` /home/sektor/Arduino/hardware/keyboardio/avr/libraries/Kaleidoscope/bin/../etc/99-kaleidoscope.rules ``` to /etc/udev/rules.d avrdude: error at /usr/share/arduino/hardware/tools/avr/etc/avrdude.conf:1133: programmer type jtagice3\_updi not found avrdude: error reading system wide configuration file “/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf” avrdude: error at /usr/share/arduino/hardware/tools/avr/etc/avrdude.conf:1133: programmer type jtagice3\_updi not found avrdude: error reading system wide configuration file “/usr/share/arduino/hardware/tools/avr/etc/avrdude.conf” make: \*\*\* [/home/sektor/Arduino/hardware/keyboardio/build-tools/makefiles//rules.mk:80: flash] Error 1 I figured out that I had to set my ARDUINO\_PATH to /share/Arduino, and in place of arduino use arduino-git. I’m not sure what the avrdude errors are about; has anyone had a similar problem and know of a solution?