I just got my Model 01 and I’m trying to flash algernon’s firmware.
Arduino IDE is installed, installed keybordio board, downloaded the example firmare and I able to flash the keyboardio.
I’ve cloned locally algernon’s repository, entered it, typed
make setup followed by
make flash, hold prog and press enter
There is an error but it still flashes the board and the keyboards acts weirdly after. What do I do wrong?
here is the error :
Sylvains-MacBook-Pro:algernon sylvain$ make flash BOARD_HARDWARE_PATH="./lib/hardware" ./lib/hardware/keyboardio/avr/libraries/Kaleidoscope/bin//kaleidoscope-builder flash Building src/algernon 0.0.0 into /var/folders/np/x4646kv15l19sh8l_q21j6gw0000gn/T//kaleidoscope-sylvain/sketch/12898088092-algernon.ino/output... - Size: firmware/algernon/algernon-0.0.0.elf - Program: 26560 bytes (92.6% Full) - Data: 1261 bytes (49.3% Full) To update your keyboard's firmware, hold down the 'Prog' key on your keyboard, and then press 'Enter'. When the 'Prog' key glows red, you can release it. 2019-10-30 21:40:45.376 system_profiler[73578:3758455] SPUSBDevice: IOCreatePlugInInterfaceForService failed 0xe00002be 2019-10-30 21:40:48.630 system_profiler[73587:3758592] SPUSBDevice: IOCreatePlugInInterfaceForService failed 0xe00002be Connecting to programmer: . Found programmer: Id = "CATERIN"; type = S Software Version = 1.0; No Hardware Version given. Programmer supports auto addr increment. Programmer supports buffered memory access with buffersize=128 bytes. Programmer supports the following devices: Device code: 0x44 Sylvains-MacBook-Pro:algernon sylvain$