# Help getting Model01-Firmware to compile (flashed non-working firmware to board)

**URL:** <https://community.keyboard.io/t/help-getting-model01-firmware-to-compile-flashed-non-working-firmware-to-board/474>\
**Category:** Programming\
**Created:** [October 20, 2017, 5:15pm UTC](https://community.keyboard.io/t/help-getting-model01-firmware-to-compile-flashed-non-working-firmware-to-board/474 "2017-10-20T17:15:21Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![jesse](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.keyboard.io/jesse/32/361_2.png) [@jesse](https://community.keyboard.io/u/jesse)\
**Post date:** [October 20, 2017, 8:52pm UTC](https://community.keyboard.io/t/help-getting-model01-firmware-to-compile-flashed-non-working-firmware-to-board/474/4 "2017-10-20T20:52:16Z")

</div>

I’m so glad it was something easy.

Also, just as a note, our bootloader has a failsafe mode. If you hold down ‘Prog’ as you plug your keyboard in, it will never try to run the user program, instead hanging out in the bootloader for a little while, so you can recover over USB.

---

_[View the full topic](https://community.keyboard.io/t/help-getting-model01-firmware-to-compile-flashed-non-working-firmware-to-board/474)._