# Is make flash working...?

**URL:** <https://community.keyboard.io/t/is-make-flash-working/4976>\
**Category:** Help and Getting Started\
**Created:** [August 12, 2021, 4:00pm UTC](https://community.keyboard.io/t/is-make-flash-working/4976 "2021-08-12T16:00:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dcavalari](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.keyboard.io/dcavalari/32/5289_2.png) [@dcavalari](https://community.keyboard.io/u/dcavalari)\
**Post date:** [August 12, 2021, 4:00pm UTC](https://community.keyboard.io/t/is-make-flash-working/4976/1 "2021-08-12T16:00:55Z")

</div>

At first I thought I was having [this issue.](https://community.keyboard.io/t/mac-flashing-doesnt-seem-to-work/4736)

However, I have reset the keyboard to factory defaults through Chrysalis, and I am still having the same problem - I run `make flash`, I hit the Prog key, the lights on the keyboard flash like they’re supposed to, and afterward it seems to be running exactly the same firmware as before.

This is the output from `make flash` - is there perhaps a different issue? I notice that there’s no progress bar.

I’m on MacOS Big Sur

```auto
Connecting to programmer: .
Found programmer: Id = "CATERIN"; type = S
    Software Version = 1.0; No Hardware Version given.
Programmer supports auto addr increment.
Programmer supports buffered memory access with buffersize=128 bytes.

Programmer supports the following devices:
    Device code: 0x44

```

---

<div class="post-metadata">

**Author:** ![dcavalari](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.keyboard.io/dcavalari/32/5289_2.png) [@dcavalari](https://community.keyboard.io/u/dcavalari)\
**Post date:** [August 12, 2021, 5:11pm UTC](https://community.keyboard.io/t/is-make-flash-working/4976/2 "2021-08-12T17:11:46Z")

</div>

Solved: I found the advanced setting for “reset EEPROM to factory defaults.” I had just been restoring the firmware to factory defaults.