# My Setup and the path here

**URL:** <https://community.keyboard.io/t/my-setup-and-the-path-here/1340>\
**Category:** My Setup\
**Created:** [April 3, 2018, 3:59am UTC](https://community.keyboard.io/t/my-setup-and-the-path-here/1340 "2018-04-03T03:59:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![darrenph1](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.keyboard.io/darrenph1/32/1065_2.png) [@darrenph1](https://community.keyboard.io/u/darrenph1)\
**Post date:** [April 3, 2018, 3:59am UTC](https://community.keyboard.io/t/my-setup-and-the-path-here/1340/1 "2018-04-03T03:59:24Z")

</div>

I built some stands for the keyboardio. The screw mounts made this a fairly simple process compared to the process to get here. I also added some velcro on the bottom so the halves don’t slide on the mouse pad. They aren’t pretty but it’s a start. Nicer wood and staining them are for the next version once it’s dialed in. Now I’m just working on getting some wrist rests…

 ![Key1](https://canada1.discourse-cdn.com/flex031/uploads/keyboard/original/2X/a/a3857144d3fb2be7a144473d76a02a8a4824b6c1.JPG)  
 ![Key2](https://canada1.discourse-cdn.com/flex031/uploads/keyboard/original/2X/5/5dea4f1b00940e5cc1f86e377a3b07300904a68f.JPG)  
 ![Key3](https://canada1.discourse-cdn.com/flex031/uploads/keyboard/original/2X/a/a5c840511f9c912c2910f08953b607a60eb6ae28.JPG)  
 ![Key4](https://canada1.discourse-cdn.com/flex031/uploads/keyboard/original/2X/e/eaace31c0e020b31c82959f26229856a0b2f52cc.JPG)

Before jumping to the Keyboardio I had an Ergodox, which I stole the same idea to adapt the keyboardio stands too.

 ![Ergo1](https://canada1.discourse-cdn.com/flex031/uploads/keyboard/original/2X/d/da43d65b91bd103997a6b48510f4933878310f93.JPG)  
 ![Ergo2](https://canada1.discourse-cdn.com/flex031/uploads/keyboard/original/2X/a/a4802f3cd1f829b71090b59a40e79fb5f9ddb830.JPG)

This whole process started 4 years ago while reading some blogs about an film editor using a Logitech G13 instead of a keyboard to edit with. Looking into it more I discovered the Razer Orbweaver and adapted it to edit with instead of the keyboard. I found that it bothered my wrist to use it flat on the desktop so I put a couple pieces of slanted foam underneath it. This was my daily driver for about 2-3 years but I always hated that I had to keep moving back to the keyboard to type. So glad I found the Keyboardio!!

 ![Orb1](https://canada1.discourse-cdn.com/flex031/uploads/keyboard/original/2X/7/755e5774507f6dae5798134bf3d9dcb37dbbab5e.JPG)