# Tap dance documentation

**URL:** <https://community.keyboard.io/t/tap-dance-documentation/5935>\
**Category:** Help and Getting Started\
**Created:** [November 11, 2022, 3:18pm UTC](https://community.keyboard.io/t/tap-dance-documentation/5935 "2022-11-11T15:18:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rhaehnel](https://avatars.discourse-cdn.com/v4/letter/r/9de053/32.png) [@rhaehnel](https://community.keyboard.io/u/rhaehnel)\
**Post date:** [November 11, 2022, 3:18pm UTC](https://community.keyboard.io/t/tap-dance-documentation/5935/1 "2022-11-11T15:18:35Z")

</div>

i’ve successfully setup arduino and can build and upload my changes to the model 100, but i’m a bit confused on how tap dance works in conjunction with chrysalis. is there any doc on this or does anyone have a working example?

---

<div class="post-metadata">

**Author:** ![lgnakano](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.keyboard.io/lgnakano/32/2441_2.png) [@lgnakano](https://community.keyboard.io/u/lgnakano)\
**Post date:** [November 17, 2022, 2:31am UTC](https://community.keyboard.io/t/tap-dance-documentation/5935/2 "2022-11-17T02:31:54Z")

</div>

I expect you found the documentation on [TapDance — Kaleidoscope documentation](https://kaleidoscope.readthedocs.io/en/latest/plugins/Kaleidoscope-TapDance.html).

I tried using Chrysalis with custom-build firmware, but I could not do some of the stuff I use on it. I am not saying it does not work, but I could not figure out how to get OneShot, TopsyTurvy, MagicCombo, SpaceCadet to work with it.

After a while, it seemed easier to just go with Arduino. If you find out how to do it, let me know.