Yeah, this is the end of my adventures in custom keyboard land, except perhaps for that wedge. Im trying to avoid fabricating anything so it accessible to anyone, but I don’t yet have a good idea without losing the left-right adjust-ability or making it thicker.
Here’s the underbelly as assembled onto the desk.
PARTS LIST
keyboard tray:
Workrite 2485 S2S Ultrathin Height Adjustable Keyboard Platform, $320
Levelling heads: (2)
https://www.amazon.com/SUNWAYFOTO-DYH-66i-DYH66i-Tripod-Leveling/dp/B008KTOZEU $80x2=$160
or (likely overkill)
https://www.amazon.com/SUNWAYFOTO-DYH-90Ri-DYH90Ri-Leveling-Rotation/dp/B00GXA8JZE/ $140*2=$280
Base plate:
Neewer 11 inches/27.5 Centimeters Dual Flash Bracket Tripod Mount $16
$17
total: $500ish.
Instructions:
1.Attach mounting plate to the keyboard tray in the middle using two 3/4"1/4-20 bolts / washer / wingnut, from below.
2 Attach leveling heads to keyboard halves.
- attach levelling heads to mounting plate using included thumbscrews.
Viola. Will show the pretty setup in the other thread.