After a computer reboot this morning, the keyboard was being wonky. After a few minutes of puzzlement, the source of the wonkiness has been found: the right palm button is detected as permanently pressed (easily seen if I switch the LED scheme to be “alight when pressed”). I’ve disconnected and rec…

Update (and conclusion): my friend with the soldering skills did the switch exchange, and my M01 is back! :heart_eyes: Now, since it’s been 2 months, I have to have my hands reacquainted with the M01 layout. That’s fine. It’s a little bit like a second honeymoon. ^.^ :sigh: I love happy endings.

I just fixed my “V” key today. One of many keychatters due to the Matias leaf springs getting stuck contacting each other. That’s why anyone purchasing the M100 will get an improved experience. Cherry-based switches don’t seem to suffer the same drawbacks of aging.

Yeah, I’m no stranger to key chatter (looking at you, ‘b’ key), but so far it was nothing that a little bit of alcohol couldn’t fix. But it’s the first time that I have a key “stuck”. The part I’m mostly wondering about is if it’s a switch or if it’s a board problem. Do you know if the LED lights u…

It may be a failed switch. The LEDs do what the controller tells them to do. You can likely see if it is broken when you look at the right angle at the transparent top housing of the switch and compare what happens inside with another one. In a healthy switch you will see a contact closing, in a bro…

It may be a failed switch.[…] You can likely see if it is broken when you look at the right angle at the transparent top housing of the switch and compare what happens inside with another one. Squinting at it and it’s mightily hard to tell. I kinda hope it’s the switch that is the issue, one way …

I actually use the “Stalker” plugin for debugging :laughing: So if your switch is lit up in Stalker mode, that probably means the metals are now stuck together, and you will need to pop open the housing and unbend the metal. I went from complete noob who took 30 minutes to pry one apart from a hou…

I actually use the “Stalker” plugin for debugging Me too. Best way to figure out if a key is active or not! So if your switch is lit up in Stalker mode, that probably means the metals are now stuck together, and you will need to pop open the housing and unbend the metal. […] I went from complet…

[image] yenzie: Me too. Best way to figure out if a key is active or not! A word of warning: The Stalker plugin on the master branch of Kaleidoscope has changed its behaviour so that the corresponding LED no longer remains lit while a key is held. Instead, it triggers both when the key is pr…

I believe I can change Stalker to keep the LED lit, but I don’t have access to my Model01 at the moment, so I’ll wait until I’m home, then I’ll test it out.

Thanks for the info! I guess that means I am still running the older plugin.

Palm key always on

Help and Getting Started

yenzie (Yanick) July 30, 2021, 10:03pm 2

Adding a note for myself for a last resort option: Guide: A second step to fixing key chatter

Topic		Replies	Views
Guide: A second step to fixing key chatter Help and Getting Started	7	10394	January 21, 2025
Model 01 one dead key and one key with key chatter Help and Getting Started	3	437	June 15, 2022
What to do if your keyboard seems to duplicate keystrokes or a key stops working Announcements	47	123304	August 8, 2019
Model 01 keys dying? Help and Getting Started	18	543	October 12, 2024
More robust keyswitches than matias Help and Getting Started question	16	1851	January 28, 2026

Palm key always on

Related topics